1-5
Parameter
None
Description
Use the system-view command to enter system view from user view.
Related command: quit, return.
Example
# Enter system view from user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
System Status and Information Display Commands
display clock
Syntax
display clock
View
Any view
Parameter
None
Description
Use the display clock command to display the current date, time, timezone and summertime of the
system, so that you can adjust them if they are wrong.
The maximum date and time that can be displayed by this command is 23:59:59 9999/12/31.
Related command: clock datetime, clock timezone and clock summer-time.
Example
# Display the current date and time of the system.
<Sysname> display clock
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00 2003/01/01 01:00:00 2003/08/08 01:00:00
Table 1-1 Field description of the display clock command
Field Description
18:36:31 beijing Sat 2002/02/02 Current date and time of the system
Time Zone Configured time zone information
Summer-Time Configured summer time information
To Next Page
Loading...
Need help?
General