EasyManuals Logo

H3C S3100 Series Command Manual

H3C S3100 Series
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #572 background imageLoading...
Page #572 background image
2-4
Description
Use the dhcp-snooping information remote-id command to configure the remote ID sub-option in
Option 82.
Use the undo dhcp-snooping information remote-id command to restore the default value of the
remote ID sub-option in Option 82.
By default, the remote ID sub-option in Option 82 is the MAC address of the DHCP Snooping device
that received the DHCP client’s request.
Note that among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Configure the remote ID sub-option of Option 82 as the system name (sysname) of the DHCP
snooping device.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dhcp-snooping information remote-id sysname
dhcp-snooping information strategy
Syntax
dhcp-snooping information strategy { drop | keep | replace }
undo dhcp-snooping information strategy
View
System view, Ethernet port view
Parameters
drop: If a packet contains Option 82, DHCP snooping drops this packet.
keep: If a packet contains Option 82, DHCP snooping keeps and forwards this packet.
replace: If a packet contains Option 82, DHCP snooping replaces the original Option 82 field with the
Option 82 field having the specified padding content and forwards the packet.
Description
Use the dhcp-snooping information strategy command in system view to configure a handling policy
for DHCP requests that contain Option 82 sent by the DHCP client.
Use the undo dhcp-snooping information strategy command to restore the default handling policy.
Use the dhcp-snooping information strategy command in Ethernet port view to configure a handling
policy for requests that contain Option 82 received on the current port.
Use the undo dhcp-snooping information strategy command to restore the default handling policy.
By default, after DHCP-snooping Option 82 support is enabled, DHCP snooping replaces the Option 82
field in the requests sent by the DHCP clients.
Note that among S3100 series switches, only S3100-EI series switches support the two commands.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals