1-8
Description
Use the display ip routing-table radix command to display the information about the routes in a
routing table in a hierarchical way.
Example
# Display the information about the routes in a routing table in a hierarchical way.
<Sysname> display ip routing-table radix
Radix tree for INET (2) inodes 2 routes 2:
+--8+--{127.0.0.0
+-32+--{127.0.0.1
Table 1-3 Description on the fields of the display ip routing-table radix command
Field Description
INET Address family
inodes Number of nodes
routes Number of routes
display ip routing-table statistics
Syntax
display ip routing-table statistics
View
Any view
Parameter
None
Description
Use the display ip routing-table statistics command to display the statistics of a routing table.
The statistics information displayed by this command includes:
z The total number of the routes
z The number of the active routes
z The number of the added routes
z The number of the routes with deleted flags
Example
# Display the statistics information about the routing table.
<Sysname> display ip routing-table statistics
Routing tables:
Proto route active added deleted
DIRECT 2 2 2 0
STATIC 0 0 0 0
To Next Page
Loading...
Need help?
General