1-23
System View: return to User View with Ctrl+Z.
[Sysname] local-user password-display-mode cipher-force
messenger
Syntax
messenger time { enable limit interval | disable }
undo messenger time
View
ISP domain view
Parameters
limit: Time limit in minutes, ranging from 1 to 60. The switch will send prompt messages at regular
intervals to users whose remaining online time is less than this limit.
interval: Interval to send prompt messages (in minutes). This argument ranges from 5 to 60 and must be
a multiple of 5.
Description
Use the messenger time enable command to enable the messenger function and set the related
parameters.
Use the messenger time disable command to disable the messenger function.
Use the undo messenger time command to restore the messenger function to its default state.
By default, the messenger function is disabled on the switch.
The purpose of this function is to remind online users of their remaining online time through clients by
message dialog box.
Examples
# Enable the switch to send prompt messages at intervals of 5 minutes to the users in the ISP domain
"system" after their remaining online time is less than 30 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain system
[Sysname-isp-system] messenger time enable 30 5
name
Syntax
name string
undo name
View
VLAN view
To Next Page
Loading...
Need help?
General