H3C S3100 Series - Display Transceiver Alarm Interface; Display Power; Display Schedule Reboot

3-6
display power
Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
power-id: Power ID.
Description
Use the display power command to display the working state of the power supply of the switch.
Example
# Display the working state of the power supply.
<Sysname> display power
Unit 1
power 1
State : Normal
display schedule reboot
Syntax
display schedule reboot
View
Any view
Parameter
None
Description
Use the display schedule reboot command to display information about scheduled reboot.
Related command: schedule reboot at, schedule reboot delay.
Example
# Display the information about scheduled reboot.
<Sysname> display schedule reboot
System will reboot at 16:00:00 2002/11/1 (in 2 hours and 5 minutes).
display transceiver alarm interface
Syntax
display transceiver alarm interface [ interface-type interface-number ]
View
Any view