2-8
Interface : Ethernet1/0/1<ifIndex.4227625>
etherStatsOctets : 30561 , etherStatsPkts : 217
etherStatsBroadcastPkts : 102 , etherStatsMulticastPkts : 25
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 177 , 65-127 : 27 , 128-255 : 2
256-511: 0 , 512-1023: 0 , 1024-1518: 11
Table 2-6 display rmon statistics command output description
Field Description
Statistics entry Index of the statistics information entry
VALID The statistics table is valid.
Interface Interface which the statistics is on
etherStatsOctets Number of bytes received
etherStatsPkts Number of the packets received
etherStatsBroadcastPkts Number of broadcast packets received
etherStatsMulticastPkts Number of multicast packets received
etherStatsUndersizePkts Number of undersize packets received
etherStatsOversizePkts Number of oversize packets received
etherStatsFragments
Number of undersize packets received with CRC
errors
etherStatsJabbers
Number of oversize packets received with CRC
errors
etherStatsCRCAlignErrors Number of packets received with CRC errors
etherStatsCollisions
Number of the received packets that cause
collisions
etherStatsDropEvents Event about dropping packets
Packets received according to length
Number of the received packets that are of
different lengths
rmon alarm
Syntax
rmon alarm entry-number alarm-variable sampling-time { delta | absolute } rising_threshold
threshold-value1 event-entry1 falling_threshold threshold-value2 event-entry2 [ owner text ]
undo rmon alarm entry-number
View
System view
To Next Page
Loading...
Need help?
General