1-17
System View: return to User View with Ctrl+Z.
# Set the maximum number of the echo request packets to 10, and the response timeout time to 300
milliseconds.
[Sysname] dhcp server ping packets 10
[Sysname] dhcp server ping timeout 300
dhcp server relay information enable
Syntax
dhcp server relay information enable
undo dhcp server relay information enable
View
System view
Parameters
None
Description
Use the dhcp server relay information enable command to enable the DHCP server to handle Option
82.
Use the undo dhcp server relay information enable command to configure the DHCP server to
ignore Option 82.
By default, the DHCP server handles Option 82.
Examples
# Configure the DHCP server to ignore Option 82.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo dhcp server relay information enable
dhcp server static-bind
Syntax
dhcp server static-bind ip-address ip-address { client-identifier client-identifier | mac-address
mac-address }
undo dhcp server static-bind { client-identifier client-identifier | ip-address ip-address |
mac-address mac-address }
View
VLAN interface view
Parameters
ip-address: IP address to be statically bound. Note that the specified IP address must belong to the
same network segment as that of the current VLAN interface.
To Next Page
Loading...
Need help?
General