2-6
Table 2-2 Description on the fields of the display icmp statistics command
Field Description
bad formats Number of received wrong format packets
bad checksum Number of received wrong checksum packets
echo Number of received echo packets
destination unreachable
Number of received destination unreachable
packets
source quench Number of received source quench packets
redirects Number of received redirection packets
echo reply Number of received replies
parameter problem Number of received parameter problem packets
timestamp Number of received time stamp packets
information request Number of received information request packets
mask requests Number of received mask requests
mask replies Number of received mask replies
Input:
time exceeded Number of received expiration packets
echo Number of sent echo packets
destination unreachable Number of sent destination unreachable packets
source quench Number of sent source quench packets
redirects Number of sent redirection packets
echo reply Number of sent replies
parameter problem Number of sent parameter problem packets
timestamp Number of sent time stamp packets
information reply Number of sent information reply packets
mask requests Number of sent mask requests
mask replies Number of sent mask replies
Output:
time exceeded Number of sent expiration packets
display ip socket
Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameters
socktype sock-type: Displays the socket information of this type. The sock type is in the range 1 to 3,
corresponding to TCP, UDP and raw IP respectively.
To Next Page
Loading...
Need help?
General