1-26
Examples
# Display the working directory on the remote SFTP server.
sftp-client> pwd
/
quit
Syntax
quit
View
SFTP client view
Parameters
None
Description
Use the quit command to terminate a connection with the remote SFTP server and return to system
view.
This command has the same effect as that of the commands bye and exit.
Examples
# Terminate a connection with the remote SFTP server.
sftp-client> quit
Bye
[Sysname]
remove
Syntax
remove remote-file&<1-10>
View
SFTP client view
Parameters
remote-file&<1-10>: Name of a file on the server. &<1-10> indicates that up to ten file names can be
input. These file names should be separated by spaces.
Description
Use the remove command to delete a specified file from the remote SFTP server.
This command has the same effect as that of the delete command.
Examples
# Delete the file named temp.c from the server.
sftp-client> remove temp.c
The followed File will be deleted:
/temp.c
Are you sure to delete it?(Y/N):y
This operation may take a long time.Please wait...
To Next Page
Loading...
Need help?
General