1-9
Related commands: authentication, hwtacacs scheme, radius scheme.
Examples
# Configure the default ISP domain system to use local authentication for login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login local
# Configure ISP domain test to use RADIUS authentication scheme rd for login users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login radius-scheme rd local
authentication super
Syntax
authentication super hwtacacs-scheme hwtacacs-scheme-name
undo authentication super
View
ISP domain view
Parameters
hwtacacs-scheme-name: Name of the HWTACACS authentication scheme, a string of 1 to 32
characters.
Description
Use the authentication super command to specify a HWTACACS authentication scheme for user level
switching in the current ISP domain.
Use the undo authentication super command to remove the specified HWTACACS authentication
scheme.
By default, no HWTACACS authentication scheme is configured for user level switching.
When you execute the authentication super command to specify a HWTACACS authentication
scheme for user level switching, the HWTACACS scheme must exist.
The S3100 series switches adopt hierarchical protection for command lines so as to inhibit users at
lower levels from using higher level commands to configure the switches. For details about configuring
a HWTACACS authentication scheme for low-to-high user level switching, refer to Switching User Level
in the Command Line Interface Operation.
Related commands: hwtacacs scheme.
To Next Page
Loading...
Need help?
General