H3C S3100 Series

1-1
1 QoS Commands
QoS Commands
burst-mode enable
Syntax
burst-mode enable
undo burst-mode enable
View
System view
Parameter
None
Description
Use the burst-mode enable command to enable the burst function.
Use the undo burst-mode enable command to disable the burst function.
By default, the burst function is disabled.
Example
# Enable the burst function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] burst-mode enable
display priority-trust
Syntax
display priority-trust
View
Any view
Parameters
None
Description
Use the display priority-trust command to display the priority trust mode on the current switch.
Related command: priority-trust.