1-5
If an FTP connection between an FTP server and an FTP client breaks down abnormally, but the FTP
server cannot be aware of this, the FTP server will keep this connection. This will occupy system
resources and affect other FTP users’ log in. You can set an idle timeout time so that the FTP server
considers an FTP connection invalid and terminates it if no data exchange occurs on it in idle timeout
time.
Examples
# Set the idle timeout time to 36 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftp timeout 36
FTP Client Configuration Commands
z In the examples of this section, if a command should be executed in FTP client view, the
configuration process for entering FTP client view will be omitted to avoid repetition. For the
configuration of the command for entering FTP client view, refer to
ftp.
z When executing the FTP client configuration commands in this section, confirm whether the
corresponding access rights are configured on the FTP server, for example, query file lists under a
working directory, read/download the specified files, create a directory/upload a file, and
rename/delete a file on the server. For the configuration of user access rights, refer to the FTP
server software description.
ascii
Syntax
ascii
View
FTP client view
Parameters
None
Description
Use the ascii command to specify that files be transferred in ASCII mode, which is used for transferring
text files.
By default, files are transferred in ASCII mode.
Related commands: binary.
To Next Page
Loading...
Need help?
General