1-2
View
ISP domain view
Parameters
local: Performs local accounting. It is not used for charging purposes, but for collecting statistics and
limiting the number of local user connections.
none: Specifies not to perform user accounting.
radius-scheme radius-scheme-name: Specifies to use a RADIUS accounting scheme. Here,
radius-scheme-name is the name of a RADIUS scheme; it is a string of up to 32 characters.
hwtacacs-scheme hwtacacs-scheme-name: Specifies to use an HWTACACS accounting scheme.
Here, hwtacacs-scheme-name is the name of an HWTACACS scheme; it is a string of up to 32
characters.
Description
Use the accounting command to configure an accounting scheme for current ISP domain.
Use the undo accounting command to cancel the accounting scheme configuration for current ISP
domain.
By default, no separate accounting scheme is configured for an ISP domain.
Note that:
z The RADIUS or HWTACACS scheme specified for the current ISP domain must have been
configured.
z The accounting scheme specified with the accounting command is for all types of users and has a
priority lower than that specified for a specific access mode.
The accounting command takes precedence over the scheme command. If the accounting
command is used in ISP domain view, the system uses the scheme referenced in the accounting
command to charge the users in the domain. Otherwise, the system uses the scheme referenced in the
scheme command to charge the users.
Related commands: scheme, radius scheme, hwtacacs scheme, accounting optional.
Examples
# Specify "radius" as the RADIUS accounting scheme that will be referenced by ISP domain
"aabbcc.net".
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] accounting radius-scheme radius
accounting lan-access
Syntax
accounting lan-access { local | none | radius-scheme radius-scheme-name [ local | none ] }
undo accounting lan-access
To Next Page
Loading...
Need help?
General