H3C S3100 Series Command Manual

5-2
Table 5-1 display mac-address multicast static command output description
Field Description
MAC ADDR MAC address
VLAN ID The VLAN in which the MAC address is manually added
STATE
State of the MAC address, which includes only
Config static
, indicating that
the table entry is manually added.
PORT INDEX
Ports out which the multicast packets destined for the multicast MAC
address are forwarded
AGING TIME(s)
Remaining lifetime of the entry.
NOAGED
indicates that the entry never
expires.
display multicast-source-deny
Syntax
display multicast-source-deny [ interface interface-type [ interface-number ] ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display multicast-source-deny command to display the multicast source port suppression
status.
z With neither a port type nor a port number specified, the command displays the multicast source
port suppression status of all the ports on the switch.
z With only a port type specified, the command displays the multicast source port suppression status
of all ports of that type.
z With both a port type and a port number specified, the command displays the multicast source port
suppression status of the specified port.
Related commands: multicast-source-deny.
Examples
# Display the multicast source port suppression status of Ethernet 1/0/1.
<Sysname> display multicast-source-deny interface Ethernet 1/0/1
Ethernet1/0/1 Multicast-source-deny disabled.
The information above shows that multicast source port suppression is disabled on Ethernet 1/0/1.
mac-address multicast interface
Syntax
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address multicast [ mac-address [ interface interface-list ] vlan vlan-id ]

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English