1-15
undo filesize
View
HWPing test group view
Parameters
size: File size, in the range 1 to 10000 Kbytes.
Description
Use the filesize command to configure the size of the file to be uploaded in an FTP test.
Use the undo filesize command to restore the default.
By default, the file size is 1000 Kbytes.
Related commands: username, password, ftp-operation.
This command applies only to the PUT operation of an FTP test.
Examples
# Configure the file to be uploaded in an FTP test as 2000 KByte.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type ftp
[Sysname-hwping-administrator-ftp] ftp-operation put
[Sysname-hwping-administrator-ftp] filesize 2000
frequency
Syntax
frequency interval
undo frequency
View
HWPing test group view
Parameters
interval: Automatic test interval in seconds. It ranges from 0 to 65,535.
Description
Use the frequency command to configure the time interval of performing automatic tests.
Use the undo frequency command to restore the default.
If interval is configured greater than 0, the system performs automatic tests at this interval.
interval defaults to 0, which means no automatic test is performed by default.
Related commands: count.
To Next Page
Loading...
Need help?
General