1-5
Example
# Display the IP-precedence-to-local-precedence mapping table on an S3100-SI series switch.
<Sysname> display qos ip-precedence-local-precedence-map
ip-precedence-local-precedence-map:
ip-precedence : 0 1 2 3 4 5 6 7
--------------------------------------------------------------------------
local-precedence(queue) : 0 0 1 1 2 2 3 3
display qos-global
Syntax
display qos-global { all | mirrored-to | traffic-limit | traffic-priority | traffic-redirect |
traffic-statistic }
View
Any view
Parameter
all: Displays all the QoS-related configuration.
traffic-limit: Displays the global traffic policing configuration.
traffic-priority: Displays the global priority marking configuration.
traffic-redirect: Displays the global traffic redirecting configuration.
traffic-statistics: Displays the global traffic accounting configuration.
Description
Use the display qos-global command to display the QoS-related configuration performed for all the
packets.
Only H3C S3100-EI series switches support this command.
Example
# Display all the QoS configurations performed for all the packets on an S3100-EI series switch.
<Sysname> display qos-global all
global: traffic-limit inbound:
Matches: Acl 2000 rule 0 running
Target rate: 128 Kbps
Conform action: remark-cos excellent-effort
Exceed action: drop
meter-statistic running
62284 byte outprofile
82521 byte inprofile
To Next Page
Loading...
Need help?
General