1-2
Field Description
Time of last flush packet received Time when the last legal flush message is received
Source MAC of last flush packet received
Source MAC address in the last legal flush message
received
Device ID of last flush packet received
Bridge MAC address of the device from which the
last legal flush message was received
Control VLAN ID of last flush packet
received
Control VLAN ID in the last legal flush message
received
A legal fulsh message refers to the message whose control VLAN ID is consistent with the receiving
control VLAN ID configured on the receiving port.
display smart-link group
Syntax
display smart-link group { group-id | all }
View
Any view
Parameter
group-id: Smart link group ID, in the range of 1 to 24.
all: Displays the information about all Smart Link groups.
Description
Use the display smart-link group command to display the information about the specific Smart Link
group or all the Smart Link groups.
Example
# Display the information about Smart Link group 1.
<Sysname> display smart-link group 1
Smart Link Group 1 information:
Device ID: 000f-e212-3456 Control-VLAN ID: 1
Member Role State Flush-count Last-flush-time
--------------------------------------------------------------------------
Ethernet1/0/1 MASTER ACTVIE 1 16:37:20 2006/04/21
AGG-1 SLAVE STANDBY 2 17:45:20 2006/04/21
Table 1-2 Description on the fields of the display smart-link group command
Field Description
Member
Member of the Smart Link group
To Next Page
Loading...
Need help?
General