1-1
1 AAA Configuration Commands
AAA Configuration Commands
access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameters
disable: Specifies not to limit the number of access users that can be contained in current ISP domain.
enable max-user-number: Specifies the maximum number of access users that can be contained in
current ISP domain. The max-user-number argument ranges from 1 to 2,072.
Description
Use the access-limit command to set the maximum number of access users that can be contained in
current ISP domain.
Use the undo access-limit command to restore the default setting.
By default, there is no limit on the number of access users in an ISP domain.
Because resource contention may occur among access users, there is a need to limit the number of
access users in an ISP domain so as to provide reliable performance to the current users in the ISP
domain.
Examples
# Allow ISP domain aabbcc.net to contain at most 500 access users.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] access-limit enable 500
accounting
Syntax
accounting { local | none | radius-scheme radius-scheme-name [ local ] | hwtacacs-scheme
hwtacacs-scheme-name [ local ] }
undo accounting
To Next Page
Loading...
Need help?
General