H3C S3100 Series Command Manual

1-8
Related command: display link-aggregation verbose.
Example
# Add Ethernet1/0/1 to aggregation group 22.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] port link-aggregation group 22
reset lacp statistics
Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type interface-number ] ]
View
User view
Parameter
interface-type: Port type
interface-number: Port number
to: Specifies a port index range, with the two interface-type interface-number argument pairs around it
as the two ends.
Description
Use the reset lacp statistics command to clear LACP statistics on specified port(s), or on all ports if no
port is specified.
Related command: display link-aggregation interface.
Example
# Clear LACP statistics on all Ethernet ports.
<Sysname> reset lacp statistics

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English