1-12
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display ND snooping entries of VLAN 1.
<Sysname> display ipv6 nd snooping
IPv6 Address MAC Address VID Interface Age Status Apply
4001::1 0015-e944-a947 1 Ethernet1/0/2 25 Bound
---- Total entries on VLAN 1: 1 ----
Table 1-8 display ipv6 nd snooping command output description
Field Description
Interface Receiving port of an ND snooping entry
Aging Aging time of an ND snooping entry, in minutes.
Status ND snooping entry status, which can be Bound or Probe.
Apply
When the ND snooping feature is used together with the IPv6 filtering feature,
this field displays
Fail
if the entry cannot be used due to insufficient ACL
resources. In other cases, this field is null.
Total entries on VLAN 1 Total number of ND snooping entries of VLAN 1.
display ipv6 neighbors
Syntax
display ipv6 neighbors { ipv6-address | all | dynamic | static | interface interface-type
interface-number | vlan vlan-id } [ | { begin | exclude | include } regular-expression ]
View
Any view
Parameters
ipv6-address: IPv6 address whose neighbor information is to be displayed.
all: Displays information of all neighbors, including neighbors acquired dynamically and configured
statically.
dynamic: Displays information of all neighbors acquired dynamically.
static: Displays information of all neighbors configured statically.
interface interface-type interface-number: Displays information of the neighbors of a specified
interface.
vlan vlan-id: Displays information of the neighbors of a specified VLAN, in the range of 1 to 4094.
|: Uses a regular expression to match neighbor entries.
regular-expression: A case-sensitive string for matching.
z begin: Displays the first matching neighbor entry and all the neighbor entries following it.
z exclude: Displays the neighbor entries not matching the specified regular expression.
z include: Displays the neighbor entries matching the specified regular expression.
To Next Page
Loading...
Need help?
General