1-7
Description
Use the web-authentication free-ip command to set a free IP address range, which can be accessed
by users before they pass Web authentication.
Use the undo web-authentication free-ip command to remove the setting or all such settings.
By default, no free IP address range is set.
z The to-be-set free IP address range cannot include the Web authentication server’s IP address.
z At most sixteen free IP address range can be set.
Examples
# Set IP address range 10.1.1.0/24 as a free address range.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication free-ip 10.1.1.0 24
web-authentication free-user
Syntax
Ethernet interface view:
web-authentication free-user ip ip-address mac mac-address
undo web-authentication free-user ip ip-address mac mac-addres
System view:
web-authentication free-user ip ip-address mac mac-address [ interface interface-list ]
undo web-authentication free-user { ip ip-address mac mac-address [ interface interface-list ] | all }
View
Ethernet interface view, system view
Parameters
ip ip-address: IP address of the web authentication-free user.
mac mac-address: MAC address of the web authentication-free user in the format of xxxx-xxxx-xxxx.
interface interface-list: Specifies an Ethernet interface list, in the format of { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10> indicates that you
can specify up to 10 port or port ranges. The starting port and ending port of a port range must be of the
same type and the ending port number must be greater than the starting port number.
all: Deletes web authentication-free users on all ports.
Description
Use the web-authentication free-user command to configure a web authentication-free user.
Use the undo web-authentication free-user command to delete web authentication-free users
configured on a port or all ports.
To Next Page
Loading...
Need help?
General