1-15
Field Description
VLAN ID VLAN ID of a MAC address-to-VLAN entry
PRIO
802.1p priority corresponding to the MAC address of a MAC address-to-VLAN
entry
STATE
The state of a MAC address-to-VLAN entry, which can be:
z S, indicating that the MAC address-to-VLAN entry is configured statically.
z D, indicating that the MAC address-to-VLAN entry is configured
automatically through the authentication server
z S&D, indicating that the MAC address-to-VLAN entry is configured both
statically and dynamically
display mac-vlan interface
Syntax
display mac-vlan interface
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display mac-vlan interface command to display all the ports with MAC address-based VLAN
enabled.
Related commands: mac-vlan enable.
Examples
# Display all the interfaces with MAC address-based VLAN enabled.
<Sysname> display mac-vlan interface
MAC VLAN is enabled on following ports:
---------------------------------------
Ethernet1/0/10 Ethernet1/0/11 Ethernet1/0/12
mac-vlan enable
Syntax
mac-vlan enable
undo mac-vlan enable
View
Ethernet port view
Default Level
2: System level
To Next Page
Loading...
Need help?
General