1-37
[Sysname-radius-radius1] undo attribute-ignore standard
# Disable the RADIUS scheme from ignoring H3C’s attributes, making the scheme to accept all H3C’s
RADIUS attributes assigned to it.
[Sysname-radius-radius1] undo attribute-ignore vendor 25506
# Disable the RADIUS scheme from ignoring any attributes, making the scheme to accept all RADIUS
attributes assigned to it.
[Sysname-radius-radius1] undo attribute-ignore all
calling-station-id mode
Syntax
calling-station-id mode { mode1 | mode2 } { lowercase | uppercase }
undo calling-station-id mode
View
RADIUS scheme view
Parameters
mode1: Sets the MAC address format to XXXX-XXXX-XXXX, where each X represents a hexadecimal
number.
mode2: Sets the MAC address format to XX-XX-XX-XX-XX-XX.
lowercase: Uses lowercase letters in the MAC address.
uppercase: Uses uppercase letters in the MAC address.
Description
Use the calling-station-id mode command to configure the MAC address format of the
Calling-Station-Id (Type 31) field in RADIUS packets.
Use the undo calling-station-id mode command to restore the default format.
By default, the MAC address format is XXXX-XXXX-XXXX, in lowercase.
Examples
# Set the MAC address format of the Calling-Station-Id field to XX-XX-XX-XX-XX-XX, in uppercase.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]radius scheme system
[Sysname-radius-system]calling-station-id mode mode2 uppercase
data-flow-format
Syntax
data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet { giga-packet | kilo-packet
| mega-packet | one-packet }
undo data-flow-format
To Next Page
Loading...
Need help?
General