1-7
cd
Syntax
cd path
View
FTP client view
Parameters
path: Path of the target directory.
Description
Use the cd command to change the working directory on the remote FTP server.
Note that you can use this command to enter only authorized directories.
Related commands: pwd.
Examples
# Change the working directory to flash:/temp.
[ftp] cd flash:/temp
# Display the current working directory.
[ftp] pwd
257 "flash:/temp" is current directory.
cdup
Syntax
cdup
View
FTP client view
Parameters
None
Description
Use the cdup command to exit the current working directory and enter the parent directory. The parent
directory must be a directory that a user is authorized to access; otherwise, the command cannot be
executed.
Related commands: cd, pwd.
Examples
# Change the working directory to flash:/temp.
[ftp] cd flash:/temp
# Change the working directory to the parent directory.
[ftp] cdup
# Display the current directory.
[ftp] pwd
257 "flash:" is current directory.
To Next Page
Loading...
Need help?
General