3-1
3 HABP Configuration Commands
HABP Configuration Commands
display habp
Syntax
display habp
View
Any view
Parameter
None
Description
Use the display habp command to display HABP configuration and status.
Example
# Display HABP configuration and status.
<Sysname> display habp
Global HABP information:
HABP Mode: Server
Sending HABP request packets every 20 seconds
Bypass VLAN: 2
Table 3-1 Description on the fields of the display habp command
Field Description
HABP Mode
Indicates the HABP mode of the switch. A switch can operate
as an HABP server (displayed as Server) or an HABP client
(displayed as Client).
Sending HABP request packets
every 20 seconds
HABP request packets are sent once in every 20 seconds.
Bypass VLAN
Indicates the IDs of the VLANs to which HABP request
packets are sent.
display habp table
Syntax
display habp table
To Next Page
Loading...
Need help?
General