1-25
Pool Number Number of address pools
Auto Number of the automatically bound IP addresses
Manual Number of the manually bound IP addresses
Expire Number of the expired IP addresses
Boot Request: 6
Dhcp Discover: 1
Dhcp Request: 4
Dhcp Decline: 0
Dhcp Release: 1
Dhcp Inform: 0
Statistics about the DHCP packets received from
DHCP clients
Boot Reply: 4
Dhcp Offer: 1
Dhcp Ack: 3
Dhcp Nak: 0
Statistics about the DHCP packets sent to DHCP
clients
Bad Messages Number of the error DHCP packets
display dhcp server tree
Syntax
display dhcp server tree { pool [ pool-name ] | interface [ interface-type interface-number ] | all }
View
Any view
Parameters
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string of 1 to 35
characters, is the name of an address pool. If you do not provide this argument, this command applies
to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not specify a VLAN
interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.
Description
Use the display dhcp server tree command to display information about address pool tree.
Examples
# Display the information about address pool tree.
<Sysname> display dhcp server tree all
Global pool:
Pool name: test123
network 10.0.0.0 mask 255.0.0.0
Child node:test1234
option 30 hex AA BB
To Next Page
Loading...
Need help?
General