2-45
[aaa_0.Sysname-cluster] black-list add-mac 0010-3500-e001
# Delete all addresses in the current cluster blacklist.
[aaa_0.Sysname-cluster] black-list delete-mac all
display cluster base-members
Syntax
display cluster base-members
View
Any view
Parameters
None
Description
Use the display cluster base-members command to display the information about all the devices in
the base cluster topology, such as member number, name, MAC address, and the current status of
each device in a cluster.
Examples
# Display the information about all the devices in the base cluster topology.
<aaa_0.Sysname> display cluster base-members
SN Device MAC Adress Status
0 aaa_0.Sysname 000f-e200-30a0 UP
1 aaa_1.S3100 000f-e200-86e4 UP
Table 2-10 Description on the fields of display cluster base-members
Field Description
SN Device number in the cluster
Device Device name
MAC Address Device MAC address
Status
Device status
Up: The member is connected.
Down: The member is disconnected.
display cluster base-topology
Syntax
display cluster base-topology [ mac-address mac-address | member member-id ]
View
Any view
To Next Page
Loading...
Need help?
General