1-24
Field Description
State Running state of MEP, which can be OK or FAILED
Time Recent time of the remote MEP when it is FAILED or OK.
MAC Status
State of the port indicated by the last CCM received from the remote MEP,
which can be UP or DOWN
display cfd service-instance
Syntax
display cfd service-instance [ instance-id ]
View
Any view
Default Level
2: System level
Parameters
instance-id: Service instance ID, ranging from 1 to 32767.
Description
Use the display cfd service-instance command to display the configuration information of service
instance.
Without specifying the service instance ID, the command will display the configuration information of all
service instances.
Examples
# Display the configuration information of all service instances.
<Sysname> display cfd service-instance
2 service instance(s) configured:
Service instance 5:
Maintenance domain: mdtest_5
Maintenance association: matest_5
Level: 5 VLAN: 5 MIP rule: None CCM interval: 1s
Service instance 6:
Maintenance domain: mdtest_6
Maintenance association: matest_6
Level: 6 VLAN: 6 MIP rule: None CCM interval: 1s
<Sysname> display cfd service-instance 7
Service instance 7:
Maintenance domain: mdtest_7
Maintenance association: matest_7
Level: 7 VLAN: 7 MIP rule: None CCM interval: 1s
MEP ID: 731 Interface: Ethernet1/0/1 Direction: Inbound
To Next Page
Loading...
Need help?
General