1-25
Table 1-11 display cfd service-instance command output description
Field Description
2 service instance(s) are configured. Number of service instance configured.
Service instance 5 Service instance ID
Maintenance domain MD of the service instance
Maintenance association: MA of the service instances
Level MD level
VLAN VLAN that the MA belongs to
MIP rule MIP generation rules configured on service instance
CCM interval Interval to send CCMs
MEP ID ID of MEPs configured on the service instance
Interface Interface of the MEP configured on the service instance
Direction Direction of the MEPs configured on the service instance
display cfd status
Syntax
display cfd status
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display cfd status command to display the status of CFD (enabled or disabled).
Examples
# Display the status of CFD.
<Sysname> display cfd status
CFD is enabled.
display cfd version
Syntax
display cfd version
View
Any view
Default Level
1: Monitor level
To Next Page
Loading...
Need help?
General