2-1
2 RMON Configuration Commands
RMON Configuration Commands
display rmon alarm
Syntax
display rmon alarm [ entry-number ]
View
Any view
Parameters
entry-number: Alarm entry index, in the range 1 to 65535.
Description
Use the display rmon alarm command to display the configuration of a specified alarm entry or all the
alarm entries. The configuration information includes: sampling type, sampled node, sampling interval,
rising and falling thresholds that trigger alarms, the condition under which an alarm is triggered, and the
last sampled value.
Related commands: rmon alarm.
Examples
# Display the configuration of all the alarm entries.
<Sysname> display rmon alarm
Alarm table 1 owned by user1 is VALID.
Samples type : absolute
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval : 20(sec)
Rising threshold : 100(linked with event 1)
Falling threshold : 10(linked with event 2)
When startup enables : risingOrFallingAlarm
Latest value : 5510006
Table 2-1 display rmon alarm command output description
Field Description
Alarm table Index of an entry in the alarm entry
user1 Entry owner: user1
Valid The alarm entry identified by the index is valid.
Samples type Sampling type, which can be absolute or delta
Variable formula The sampled node
To Next Page
Loading...
Need help?
General