H3C S3100 Series Command Manual

1-11
The description on a specific field is available for the test results of all types of tests, so that not the
description on the output information of all types of tests is provided here.
display hwping statistics
Syntax
display hwping statistics [ administrator-name operation-tag ]
View
Any view
Parameters
administrator-name: Name of the administrator creating the test.
operation-tag: Test operation tag.
Description
Use the display hwping statistics command to display test statistics.
After a test begins, if all the probes in the first test have not been finished, when you use the command
to view statistics, all statistics results will be 0.
Examples
# Display the statistics information for admin jitter test group, the test type of which is jitter.
<Sysname> display hwping statistics admin jitter
HWPing entry(admin admin, tag jitter) statistics record:
No. : 1
Destination ip address: 169.254.10.3
StartTime: 2000/1 /2 3 :12:44
LifeTime: 21
Send operation times: 0 Receive response times: 0
Max Round Trip Time: 0 Min Round Trip Time: 0
Sum Round Trip Time: 0 Average Round Trip Time: 0
Square-Sum of Round Trip Time: 0 Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number:0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Jitter result:
Min Positive SD:0 Min Positive DS:0
Max Positive SD:0 Max Positive DS:0
Positive SD Number:0 Positive DS Number:0
Positive SD Sum:0 Positive DS Sum:0
Positive SD average:0 Positive DS average:0
Positive SD Square Sum:0 Positive DS Square Sum:0
Min Negative SD:0 Min Negative DS:0
Max Negative SD:0 Max Negative DS:0
Negative SD Number:0 Negative DS Number:0
Negative SD Sum:0 Negative DS Sum: 0
Negative SD average:0 Negative DS average:0

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English