EasyManuals Logo

H3C S3100 Series Command Manual

H3C S3100 Series
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #991 background imageLoading...
Page #991 background image
1-12
Negative SD Square Sum:0 Negative DS Square Sum:0
SD lost packets number:0 DS lost packet number:0
SD packet lost in test:0% DS packet lost in test:0%
Unknown result lost packet number:0
Table 1-8 Description on fields in the output of the display hwping statistic command
Field Description
Start time The time when a test starts
Lifetime The time that a test lasts
Send operation times The number of the sent test packets.
Receive response times The number of successful test attempts
Min/Max/Average Round Trip Time Roundtrip time in its minimum, maximum, and average
Square-Sum of Round Trip Time The square sum of roundtrip time
Packet lost in test The number of lost packets in a test
Disconnect operation number
The number of forcible disconnections performed by the opposite
end
Operation timeout number The number of timeout in a test
System busy operation number The number of test failures due to busy system
Connection fail number The number of connection failures to the opposite end
Operation sequence errors The number of received disordered packets
Drop operation number The number of failures in allocating system resource
Other operation errors The number of other operation errors
Min Positive SD (DS)
The jitter value from source to destination (destination to source) is
the minimum of positive value
Max Positive SD (DS)
The jitter value from source to destination (destination to source) is
the maximum of positive value
Positive SD (DS)
number/sum/average/square sum
The jitter value from source to destination (destination to source) is
the number/sum/average/square sum of positive jitter values
Min Negative SD (DS)
The jitter value from source to destination (destination to source) is
the minimum of negative value
Max Negative SD (DS)
The jitter value from source to destination (destination to source) is
the maximum of negative value
Negative SD (DS)
number/sum/average/square sum
The jitter value from source to destination (destination to source) is
the number/sum/average/square sum of negative jitter values
SD (DS) lost packets number
The number of the lost packets from source to destination
(destination to source)
This value has nothing to do with NTP synchronization.
SD (DS) packet lost in test
Packet loss ratio from source to destination (destination to source)
in one test
This value has nothing to do with NTP synchronization.
Unknown result lost packet number The number of the lost packets for unknown reason
dns-server
Syntax
dns-server ip-address

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals