1-6
Examples
# Enable port security; configure the port security mode of Ethernet 1/0/1 as autolearn and create a
security MAC address entry for 0001-0001-0001, setting the associated port to Ethernet 1/0/1 and
assigning the MAC address to VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-security enable
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] port-security max-mac-count 100
[Sysname-Ethernet1/0/1] port-security port-mode autolearn
[Sysname-Ethernet1/0/1] mac-address security 0001-0001-0001 vlan 1
# Use the display mac-address interface command to verify the configuration result.
[Sysname]display mac-address interface Ethernet 1/0/1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
0001-0001-0001 1 Security Ethernet1/0/1 NOAGED
--- 1 mac address(es) found on port Ethernet1/0/1 ---
port-security authorization ignore
Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Ethernet port view
Parameters
None
Description
Use the port-security authorization ignore command to configure the port to ignore the authorization
information delivered by the RADIUS server.
Use the undo port-security authorization ignore command to restore the default configuration.
By default, the port uses (does not ignore) the authorization information delivered by the RADIUS
server.
You can use the display port-security command to check whether the port will use the authorization
information delivered by the RADIUS server.
To Next Page
Loading...
Need help?
General