1-33
Parameters
ip ip-address: Specifies an IP address, whose conflict statistics will be cleared.
all: Clears all address conflict statistics.
Description
Use the reset dhcp server conflict command to clear address conflict statistics.
Related commands: display dhcp server conflict.
Examples
# Clear all address conflict statistics.
<Sysname> reset dhcp server conflict all
reset dhcp server ip-in-use
Syntax
reset dhcp server ip-in-use { all | interface [ interface-type interface-number ] | ip ip-address | pool
[ pool-name ] }
View
User view
Parameters
all: Clears the dynamic address binding information about all IP addresses.
interface [ interface-type interface-number ]: Clears the dynamic address binding information about a
specified interface address pool. If you do not specify the interface-number argument, this command
clears the dynamic address binding information about all interface address pools.
ip ip-address: Clears the dynamic address binding information about a specified IP address.
pool [ pool-name ]: Clears the dynamic address binding information about a specified address pool.
The pool-name argument, a string of 1 to 35 characters, is the name of an address pool. If you do not
provide this argument, this command clears the dynamic address binding information about all global
address pools.
Description
Use the reset dhcp server ip-in-use command to clear the specified or all dynamic address binding
information.
Related commands: display dhcp server ip-in-use.
Examples
# Clear the dynamic address binding information about the IP address 10.110.1.1.
<Sysname> reset dhcp server ip-in-use ip 10.110.1.1
reset dhcp server statistics
Syntax
reset dhcp server statistics
To Next Page
Loading...
Need help?
General