1-23
Maintenance association: matest6
Table 1-9 display cfd mp command output description
Field Description
Interface Ethernet1/0/1 VLAN 100
MP configuration of the specified VLAN on the
specified port
MEP ID ID of the MEP
MIP A MIP in the MP
Level MD level that an MP belongs to
Service instance Service instance to which the MP belongs
Direction Direction of the MP
Maintenance domain MD to which an MP belongs
Maintenance association MA to which an MP belongs
display cfd remote-mep
Syntax
display cfd remote-mep service-instance instance-id mep mep-id
View
Any view
Default Level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a remote MEP, ranging from 1 to 8191.
Description
Use the display cfd remote-mep command to display the information of a remote MEP.
Examples
# Display the information of remote MEP 10 in service instance 4.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC Address State Time MAC Status
20 00E0-FC00-6565 OK 2006/03/06 02:36:38 UP
30 00E0-FC27-6502 OK 2006/03/06 02:36:38 DOWN
40 00E0-FC00-6510 FAILED 2006/03/06 02:36:39 DOWN
50 00E0-FC52-BAA0 OK 2006/03/06 02:36:44 DOWN
60 0010-FC00-6502 OK 2006/03/06 02:36:42 DOWN
Table 1-10 display cfd remote-mep command output description
Field Description
MEP ID ID of the remote MED
MAC Address MAC address of the remote MEP device
To Next Page
Loading...
Need help?
General