H3C S3100 Series Command Manual

4-2
Table 4-1 Description on the fields of display system-guard attack-record
Field Description
Target No Number of the attack record
Range Control range of the attack
Packet type Type of the attack packet
Port Number of the port being attacked
MAC address Source MAC address of the attack packet
IP address Source IP address of the attack packet
Alive time
Remaining time during which attack packets of the type are
isolated
display system-guard state
Syntax
display system-guard state
View
Any view
Parameter
None
Description
Use the display system-guard state command to display the state of the system-guard feature.
Related command: system-guard enable, system-guard detect-threshold, and system-guard
timer-interval.
Example
# Display the state of the system-guard feature.
<Sysname> display system-guard state
System-guard Status: Enabled
Permitted Interfaces:
Ethernet1/0/1
Detect Threshold: 201
Isolated Time: 20
Attack Number: 0

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English