1-6
When you use the display dns ipv6 dynamic-host command to check the IPv6 dynamic domain
names in the cache, the system will display the first 21 characters of the domain names if they contain
more than 21 characters. This is because the domain name displayed in the Domain-name field can be
up to 21 characters in length.
display ipv6 fib
Syntax
display ipv6 fib
View
Any view
Parameters
None
Description
Use the display ipv6 fib command to display all the IPv6 FIB entries.
The switch looks up a matching IPv6 FIB entry for forwarding an IPv6 packet.
Examples
# Display all the IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 5
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : HU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : InLoopBack0
Destination: FE80:: PrefixLength : 10
NextHop : :: Flag : BU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : NULL0
Destination: 2008:: PrefixLength : 64
NextHop : 2008::5600 Flag : U
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : Vlan-interface1
Destination: 2008::5600 PrefixLength : 128
NextHop : ::1 Flag : HU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : InLoopBack0
Destination: 2001:: PrefixLength : 64
NextHop : 2008::3610 Flag : GSU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : Vlan-interface1
To Next Page
Loading...
Need help?
General