1-9
Total 2 2 2 0
Table 1-4 Description on the fields of the display ip routing-table statistics command
Field Description
Proto Routing protocol
route Total number of routes
active Number of the active routes that are currently in use
added
Number of the routes that are added to the routing table after the switch starts or
the routing table is cleared last time
deleted
Number of the routes with deleted flags (this type of routes will be removed after a
period of time)
Total Total numbers of various routes
display ip routing-table verbose
Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Use the display ip routing-table verbose command to display the detailed information about a routing
table.
You can use this command to display all the routes, including the inactive and invalid routes.
Example
# Display the detailed information about the routing table.
<Sysname> display ip routing-table verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Destinations: 2 Routes: 2
Holddown: 0 Delete: 0 Hidden: 0
**Destination: 127.0.0.0 Mask: 255.0.0.0
Protocol: #DIRECT Preference: 0
*NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0)
State: <NoAdvise Int ActiveU Retain Unicast>
Age: 57:12 Cost: 0/0
To Next Page
Loading...
Need help?
General