1-18
Parameters
None
Description
Use the display ipv6 statistics command to display statistics of IPv6 packets and ICMPv6 packets.
You can use the reset ipv6 statistics command to clear all IPv6 and ICMPv6 packet statistics.
Examples
# View the statistics of IPv6 packets and IPv6 ICMP packets.
<Sysname> display ipv6 statistics
IPv6 Protocol:
Sent packets:
Total: 580
Local sent out: 550 forwarded: 0
raw packets: 30 discarded: 0
routing failed: 0 fragments: 0
fragments failed: 0
Received packets:
Total: 572
local host: 572 hopcount exceeded: 0
format error: 0 option error: 0
protocol error: 0 fragments: 0
reassembled: 0 reassembly failed: 0
reassembly timeout: 0
ICMPv6 protocol:
Sent packets:
Total: 132
unreached: 0 too big: 0
hopcount exceeded: 0 reassembly timeout: 0
parameter problem: 0
echo request: 30 echo replied: 17
neighbor solicit: 43 neighbor advert: 42
router solicit: 0 router advert: 0
redirected: 0
Send failed:
ratelimited: 0 other errors: 0
Received packets:
Total: 126
checksum error: 0 too short: 0
bad code: 0
unreached: 10 too big: 0
hopcount exceeded: 0 reassembly timeout: 0
parameter problem: 0 unknown error type: 0
echoed: 17 echo replied: 30
neighbor solicit: 34 neighbor advert: 35
router solicit: 0 router advert: 0
redirected: 0 router renumbering: 0
unknown info type: 0
Deliver failed:
bad length: 0 ratelimited: 0
To Next Page
Loading...
Need help?
General