H3C S3100 Series

1-18
reset oam
Syntax
reset oam [ interface interface-type interface-number ]
View
User view
Default Level
2: System level
Parameters
interface interface-type interface-number: Specify a port by its type and number.
Description
Use the reset oam command to clear the statistics on Ethernet OAM packets and Ethernet OAM link
error events of an Ethernet port.
If you do not specify the interface keyword, this command clears the statistics on Ethernet OAM
packets and Ethernet OAM link error events of all the ports.
Related commands: display oam, display oam link-event.
Examples
# Clear the statistics on Ethernet OAM packets and Ethernet OAM link error events of all the ports.
<Sysname> reset oam