1-8
cfd md
Syntax
cfd md md-name level level-value
undo cfd md md-name
View
System view
Default Level
2: System level
Parameters
md md-name: Specifies the name of an MD, which is a string of 1 to 43 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
level level-value: Specifies an MD level, ranging from 0 to 7.
Description
Use the cfd md command to create an MD.
Use the undo cfd md command to delete an MD.
By default, no MD is created.
Note that:
z You can create only one MD with a specific level. MD cannot be created if you enter an invalid MD
name or an existing MD name.
z When deleting an MD, you will also delete the configurations related to that MD.
Examples
# Create an MD named test_md, with its level being 3.
<Sysname> system-view
[Sysname] cfd md test_md level 3
cfd mep
Syntax
cfd mep mep-id service-instance instance-id { inbound | outbound }
undo cfd mep mep-id service-instance instance-id
View
Ethernet interface view
Default Level
2: System level
Parameters
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
inbound: Creates an inward-facing MEP.
outbound: Creates an outward-facing MEP.
To Next Page
Loading...
Need help?
General