H3C S3100 Series Command Manual

1-4
Max mac-address num is 4
Stored mac-address num is 0
Authorization is ignore
Ethernet1/0/2 is link-down
Port mode is AutoLearn
NeedtoKnow mode is disabled
Intrusion mode is no action
Max mac-address num is not configured
Stored mac-address num is 0
Authorization is ignore
Ethernet1/0/3 is link-down
Port mode is AutoLearn
NeedtoKnow mode is disabled
Intrusion mode is BlockMacaddress
Max mac-address num is not configured
Stored mac-address num is 0
Authorization is ignore
Table 1-2 Description on the fields of the display port-security command
Field Description
Equipment port security is enabled Port security is enabled on the switch.
AddressLearn trap is Enabled
The sending of address-learning trap messages
is enabled.
Intrusion trap is Enabled
The sending of intrusion-detection trap
messages is enabled.
Dot1x logon trap is Enabled
The sending of 802.1x user authentication
success trap messages is enabled.
Dot1x logoff trap is Enabled
The sending of 802.1x user logoff trap messages
is enabled.
Dot1x logfailure trap is Enabled
The sending of 802.1x user authentication failure
trap messages is enabled.
RALM logon trap is Enabled
The sending of MAC-based authentication
success trap messages is enabled.
RALM logoff trap is Enabled
The sending of logoff trap messages for
MAC-based authenticated users is enabled.
RALM logfailure trap is Enabled
The sending of MAC-based authentication
failure trap messages is enabled.
Disableport Timeout: 20 s The temporary port-disabling time is 20 seconds.
OUI value The next line displays OUI value.
Index OUI index
Ethernet1/0/1 is link-up The link status of port Ethernet 1/0/1 is up.
Port mode is AutoLearn The security mode of the port is autolearn.
NeedtoKnow mode is needtoknowonly The NTK (Need To Know) mode is ntkonly.
Intrusion mode is BlockMacaddress
The intrusion detection mode is
BlockMacaddress.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English