2-4
Description
Use the display am user-bind ipv6 command to display IPv6 bindings.
Related commands: am user-bind.
Examples
# Display bindings of all ports.
<Sysname> display am user-bind ipv6
Following User address bind have been configured:
Mac Ipv6 Port
000f-e200-5101 1::ef:1 Ethernet1/0/1
000f-e200-5102 1::ef:2 Ethernet1/0/2
Unit 1:Total 2 found, 2 listed.
Total: 2 found.
The above output displays that two port binding settings exist on unit 1:
z MAC address 000f-e200-5101 and IPv6 address 1::ef:1 are bound to Ethernet 1/0/1.
z MAC address 000f-e200-5102 and IPv6 address 1::ef:2 are bound to Ethernet 1/0/2.
To Next Page
Loading...
