1-40
Primary Acc State=active, Second Acc State=block
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 1-5 Description on the fields of the display radius scheme command
Field Description
SchemeName Name of the RADIUS scheme
Index Index number of the RADIUS scheme
Type Type of the RADIUS servers
Primary Auth IP/Port
IP address/port number of the primary authentication
server
Primary Acct IP/Port IP address/port number of the primary accounting server
Second Auth IP/Port
IP address/port number of the secondary authentication
server
Second Acct IP/Port
IP address/port number of the secondary accounting
server
Auth Server Encryption Key Shared key for the authentication servers
Acct Server Encryption Key Shared key for the accounting servers
Accounting method Accounting method
Accounting-On packet enable, send
times = 15 , interval = 3s
The switch sends up to 15 Accounting-On messages at
intervals of 3 seconds after restarting.
TimeOutValue(in second) RADIUS server response timeout time
RetryTimes
Maximum number of transmission attempts of a RADIUS
request
RealtimeACCT(in minute) Real-time accounting interval in minutes
Permitted send realtime PKT failed
counts
maximum allowed number of continuous real-time
accounting failures
Retry sending times of noresponse
acct-stop-PKT
Maximum number of transmission attempts of the
buffered stop-accounting requests
Quiet-interval(min)
Time that the switch must wait before it can restore the
status of a primary server to active
Username format Username format
Data flow unit Data unit of data flow
Packet unit Packet unit of data flow
calling_station_id format
MAC address format of the Calling-Station-Id (Type 31)
field in RADIUS packets
Primary Auth State Status of the primary authentication server
Second Auth State Status of the secondary authentication server
Primary Acc State Status of the primary accounting server
Second Acc State Status of the secondary accounting server
To Next Page
Loading...
Need help?
General