09/03
6-11
DC 3535/2240/1632, WC M24
700-xxx ESS Configuration NVM List
General Procedures and Information
Initial issue
700-130 Sleep Mode Timer 60 15~240 15~240min (in increments of 1 min.)
700-131 Sleep Mode Available 1 0~1 0=Disable; 1=Enable
700-132 Operation Panel OK Beep 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-133 Operation Panel NG Beep 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-134 Job Complete Beep with Copy 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-135 Job Complete Beep without Copy 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-136 Abnormal Warning Beep 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-137 Job Incomplete Beep 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-138 Ready Beep 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-139 Toner Empty Warning Beep 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-140 Bell Tone 2 0~3 0=Off; 1=Low volume; 2=Medium volume; 3=High volume
700-141 Line Monitor Tone 2 0~3 1=Low volume; 2=Medium volume; 3=High volume
700-144 Auto Log Print Flag 0 0~1 0=Off; 1=On
700-145 Report Duplex Print 0 0~1 0=Off; 1=On
700-146 Mail Box Receive Report On 0~1 0=Off; 1=On
700-147 Protocol Monitor Output Control 0 0~2 0=When instructed; 1=When error occurs; 2=When normal
700-148 Broadcast / Multi-Poll Report Output
Control
1 0~1 0= Do not output, 1= Output
700-149 Relay Broadcast Report Output Setting 1 0~3 0 = No; 1= Send to Send-station; 2= Print to Self-station; 3= Send to Sent-station & Print to Self-station
700-150 FAX Communication Report Output
Control
1 0~1 0= Do not output; 1= Output
700-151 Transmission Report on Error Output
Control
1 0~2 0=Off; 1=On; 2=Output at normal
700-152 User Abort Transmission Report Output
Control
0 0~1 0=Do not output; 1=Output
700-153 Telephone number registration 48 18~48 48=Priority 0 (low); 38=Priority 1; 28=Priority 2; 18=Priority 3 (high); Default=Priority 0 (48)
700-164 Language 2 1~13 1=Japanese; 2=English; 3=French; 4=German; 5=Italian; 6=Spanish; 7=Portuguese; 8=Russian; 9=Chinese;
10=Korean; 11=Thai; 12=Vietnamese; 13=Taiwanese
700-165 Country Code XC=840
XE=826
- 0=Undefined; 840=USA; 124=Canada; 076=Brazil; 3=Latin America; 826=UK; 276=Germany; 380=Italy;
250=France; 724=Spain; 528=Holland; 756=Swiss; 752=Sweden; 056=Belgium; 040=Austria; 620=Portugal;
246=Finland; 208=Denmark
700-166 Territory - 1=FX; 2=XC; 3=XE; 4=AP (read-only - see 700-338)
700-167 Fax Print Priority 48 18~48 48=Priority 0 (low); 38=Priority 1; 28=Priority 2; 18=Priority 3 (high); Default=Priority 0 (48)
700-168 I-Fax Print Priority 48 18~48 48=Priority 0 (low); 38=Priority 1; 28=Priority 2; 18=Priority 3 (high); Default=Priority 0 (48)
700-169 Print Priority 48 18~48 48=Priority 0 (low); 38=Priority 1; 28=Priority 2; 18=Priority 3 (high); Default=Priority 0 (48)
700-170 Copy Priority 38 18~48 48=Priority 0 (low); 38=Priority 1; 28=Priority 2; 18=Priority 3 (high); Default=Priority 0 (38)
700-171 Key Op Tools Entry Password 1111 0000~999999 ASCII '0'~'9'. 4 ~12 digits.
700-173 Off Hook Alarm 2 0~3 0 = Off, 1 = Low volume, 2 = Medium volume, 3 = High volume
700-174 Transaction Report Log 0 0~1 0 = Receiver Name>Receive Station Name>Telephone No.>Receive station ID>CCITT XX (Domestic, M/N
common); 1 = Receive station ID given highest priority
700-175 Transaction Report Display point 0 0~1 0= Displays lead edge in 40 digits; 1= Displays rear edge in 40 digits
Table 1 Chain 700
Chain-Link Name Default Range Description
To Next Page
Loading...
Need help?
General
