09/03
2-679
DC 3535/2240/1632, WC M24
116-714, 116-715
Status Indicator RAPs
Initial issue
116-714 A HP-GL command error was detected
[HP-GL/2 command error
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Correct or remove the data in the print data that causes the error.
116-715 PLW form registry error
The PLW form data cannot be registered because of the restriction of the number of forms.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Use the Operation Panel to check the registered forms, and delete unnecessary ones. Or
delete unnecessary forms.
To Next Page
Loading...
Need help?
General
