09/03
2-676
DC 3535/2240/1632, WC M24
116-701, 116-702
Initial issue
Status Indicator RAPs
116-701 Execute forced separation of two sides
Due to insufficient memory, 2-Sided print is impossible.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Expand the memory or install the HDD if the HDD is not installed.
116-702 Perform printing by using a substitution font
[Printed with a substitution font.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on.
To Next Page
Loading...
Need help?
General
