Xerox DocuColor 2240

09/03
2-616
DC 3535/2240/1632, WC M24
102-370, 102-371
Initial issue
Status Indicator RAPs
102-370 Interface Length
Interface length failure. The parameter notified from the Controller was incorrect.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
102-371 Interface Parameter
Interface parameter failure. The parameter notified from the Controller was incorrect.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.