09/03
2-612
DC 3535/2240/1632, WC M24
102-362, 102-363
Initial issue
Status Indicator RAPs
102-362 No Object
Object non-existence
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-363 Invalid ID
Incorrect ID
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
To Next Page
Loading...
Need help?
General
