Xerox DocuColor 2240

09/03
2-613
DC 3535/2240/1632, WC M24
102-364, 102-365
Status Indicator RAPs
Initial issue
102-364 Parameter
Parameter error
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-365 Reserve Attribute
Reserve attribute
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)